TWIN FORCE boom
The ultimate in capacity, weather independence and application technology
The biggest challenge is timing due to weather conditions. Let’s take control. With the HARDI TWIN system, air will help you control the wind. You are in control of the speed and angle giving you the possibility of covering the whole plant, from top to bottom.
The ideal high capacity solution
Spray drift from conventional sprayer can be so strong that the operator has to stop before having the spray job done. With effi cient drift control it is much easier for the operator to be able to spray the entire field.
Under most conditions the farmers get at least twice as many hours for a safe and efficient spray job with the TWIN sprayer compared to conventional spraying.
The TWIN FORCE is available in sizes from 18 to 36 m.
Up to 100% more spray capacity
Timing is everything! The results overleaf show that during Spring 2015 the wind conditions for conventional spraying would only allow 31 days of spraying whilst using a TWIN Force you would gain over 45 extra days suitable for spraying. At the same time you can spray faster and have less filling time from reduced water consumption.
Increased spray opportunities, reduced drift, reduced chemical usage, accurate placement, faster spraying speed, result in improved economy!
Save up to 30% on chemicals
Many trials throughout the years have shown a better chemical efficacy using TWIN.
This gives the opportunity to adjust the chemical dose, and at some markets we see up to 30% reduction in chemicals consumption at the farm through the season.
- Up to 100% more spray capacity
- Save up to 30% on chemicals
- Reduced drift
- Better penetration in the crops
- Improved spraying economy
- Lower water consumption
- Faster spraying speeds
- More than 30 years' experience
The DELTA FORCE boom
Compact on the road – wide in the field
The DELTA FORCE boom is made to perform. It is a practical but strong boom designed for productivity and performance. We have optimised weight and strength to produce a large boom for reliable performance at fast spray speeds. Despite its width, the DELTA FORCE boom is only 2.55 m wide when folded up for transport. The boom’s simple yet effective pendulum suspension controls boom movements, while a low centre of gravity ensures perfect boom balance. With just two parameters to adjust (pendulum and dampening), the DELTA FORCE boom is easy to customise and maintain.
The DELTA FORCE boom is available from 24 m to 39 m.
One boom – two spray widths: HARDI’s boom-folding system allows the operator to spray at two different widths by choosing whether to fold out the last section.
ALU boom
Aluminium booms are constructed of 4 or 5 round tubes in a three-dimensional trellis structure.
The profiles have internal ribs which reinforce the boom strength while keeping an incomparable resistance to corrosion.
The aluminium booms are equipped with PENTANOZZLES.
ALPHA evo is available with Pommier aluminium booms from 24 to 44 m.
Boom management systems
AutoSlant, AutoHeight and AutoTerrain
The HARDI AutoSlant, AutoHeight and AutoTerrain systems will automatically control the boom
This makes the job much easier for the driver, and the result will be a better spray application. The system is known for the following features:
- Robust and precise ultrasonic sensors
- Option to choose between soil, crop or hybrid mode
- Provortional valve for smooth movements (AutoHeight, AutoTerrain)
- Slant, tilt and height correction (AutoHeight, AutoTerrain)
- Slant and height correction (AutoSlant)
- AutoTerrain works and reacts on both boom movements and twisting forces on the boom. This allows the system to be proactive and react on the cause more than on the symptom.
